KSC G19 upgrade
 

Hey all. Im thinking about getting a threaded barrel for my G19 so that I can put a sick supressor on it. First of all, to those that have done this, where did u get such a barrel? What make and from where? Also, what silencer do you think would go with this? I need something light-weight cause glocks apprently use the browning system to cycle rounds. That way it wont interfere with the blowback. I might as well just upgrade the slide, which means i need to upgrade the spring, then the high flow valve, then the hammer....ugh, airsoft is so expensive.

Also, if any of you guys have any videos of silenced guns, whether real of airsoft, feel free to post here as well. Thanks!

Looks to me that there areent alot of options to putting a silencer on a G19.
You will definately need an outter barrel thats threaded, only one I found was this:
http://www.wgcshop.com/pcart/shopper...me%20For%20KSC

Then choose a silencer that fits that threading that isnt too huge. Like this one:
http://www.wgcshop.com/pcart/shopper..._cat_Silencers

Keep it under 120mm in length, and it should be good.

Be sure to check out the reviews for G19 threated barrels, though. I seem to recall that the G&G version isn't too great. Try the Shooter's Design G19 threaded barrel.

http://www.airsoftretreat.com/featur...iews/sdbarrel/

Good luck.

Shooter Design stuff is really top notch.

Yea, i meant to say the Shooters Design outer barrel. Apparently, those are really good threaded barrels since its all one peice, as opposed to the G&G where there is an adapter in between.

The only place I could find a Shooters Deign barrel is at DenTrinity and im not sure whether I can import an outer barrel from Hong Kong without it being seized by customs. I guess the only other thing I could do is ask Will from SpecArms to special order it for me. I doubt anyone on these boards has it.

But yea, that silencer looks pretty good, i might get it. It has to be light-weight but still look "cool". Hard to find, but once I do, ill be sure to post around here to make u guys drool. Hehe. Man, this airsoft stuff is wearing down my wallet.

Thnx!

Woah, a silencer would look real nice on a glock 19. Does anyone know if the Shooter's Design G19 Threaded Barrel would work with a KJW Glock 23? Both Glock 19 and 23s look the same but are the barrels any differnt?

I have the G&G metal slide kit w/ threaded outer barrel.

I use this suppressor with it:
http://www.wgcshop.com/pcart/shopper.php?itm=GBT-SOPN01

Works great. Serious modifications were not required for the installation, but I did polish the underside of the top of the slide to relieve friction against the chamber.

you can import that kinda stuff from the states without seizures?

I'm a distributor for Wargamer's Club and UNCompany.

If you need something, get in touch with me.

Does anyone know where I can get a Shooters Design outer barrel? None of the local retailers here have access to it....

Read the post above yours.

Ive already contacted him. Neither UN or WGC have that item. I wouldn't have posted if I hadn't read my own thread :D

It's available at Den Trinity, but no retailers here like to deal with them.

And im assuming I can't order from them cause it'll be seized by customs right? Yeesh...what a predicament.

More like you can't order from Den because they'll never reply to your order requests...

Wait. So I need to know whether I can order from DEN and whether it will not get seizzed by customs....

Dammit! Why does no one in Canada carry this item?!?!?!!? :smack: :kill: :kill:

we can say that customs will seize it - but you'll get lucky and it goes through.
we can also say that customs will not seize it - but the shipment happens to go to a tightass customs officer who decides to seize it.

In the end, the customs officer is God as far as your shipiment is concerned. Once it's seized, there isn't too much you can do to recover it.

Your call.

Reserecting this thread just because I bought a G&G Threaded Barrel for my KSC G19 with metal slide and the works for upgrades. Anyways, It cycles funny when pulling on the slide, but when I shoot it the slide jams full forward and empties the mag of gas. I read that filling is in order, but where exactly? Top, one of the angled parts on the bottom.................. Working on this for a couple hours tonight trying to figure out where it's screwing up, but I don't want to file every single surface on it to find out it's screwed for good.

Thanks.

I just had this experience and got it sorted out:

1. You need to use a smaller o-ring (I got mine from a WA valve) for the inner tip so it fits in the G&G barrel.

2. Then file the corner of the front of the chamber in a slight angle like in the pic.

It'll work perfect after that :)

No O-ring in mine, and filing it down on the top to a better angle didn't do anything. It works in my plastic slide G19, but no matter how light a thing I put on the end of the barrel, it locks up tight. Put a featherweight chrony sensor on to chrony it, slide locks up. Oh well, at least the threaded barrel looks kinda cool.

The metal slide I am using is the cheapo white trade one. What metal slide do you have? And do you see where I file? The corner of the front chamber only, on both sides. I get this idea from comparing my metal outer that came with my metal slide, that barrel had the angle so I did it and wham it worked.

If you don't have an o-ring I strongly recommend you get one, the inner barrel is supposed to have an o-ring wrapped like mine for stablizing shots and also puts the back hook of the inner assembly at a good angle to engage the frame. Which could also be your lock up problem. I know exactly how you feel, took me 2 weeks to figure it out.

Now try this, when you gun locks up with silencer attached, turn the gun up side down, and cock it. It works right? Now if this works it either means the hooks on the outer isn't engaging the frame right, or the front chamber's sharp corner (GNG's sharp) is catching the chamber space on the slide. That's why the file.