anyone??

have yet to scrim with mine, but I added a MS120sp so I should be around 400fps. Chronied it and im sub 200fps. word has it, the hopup is 3mm to far forward and needs a washer to seat it against the mechbox properly. Will report back when I get it right.

Ok,I will answer one of my own questions here,so other people could get the correct information.

STAR GP-30 Grenade Launcher will fit ICS AK74M with very little modification.

http://s33.photobucket.com/albums/d9...attachment.jpg
http://s33.photobucket.com/albums/d9...ttachment1.jpg


Just replace the small screw on the front fixing with some longer ones,then you are done.

This is the original post from Red Alliance Forum:
http://www.red-alliance.net/phpBB2/viewtopic.php?t=3522

problem seems to be the air seal. i took apart the mechbox again and check the piston head...not the best quality and it was dried out...same with the cylinder head. I lubed them up and FPS flew right up to 400fps. Still, I ordered a new piston head and nozzel.

Battery?
 

I’ve been wanting to get the AK-74M for a while and am going to order it as soon as I know exactly what I want to get with it, I was just wondering... Would an 8.4V 3600mA Large Battery work? Or should I go with one that is less powerful?

Thanks

Hi i jsut got my ICS AK 74M and the screw holding the grip covering the moter was loose but i didn't notice it. The screw is long gone, so i took one from were the stock is held on because it seemed to be ok with jsut one since the stock snaps in. after i screwed that in it and hook the battery back up and shoot. the thing makes a wired noise and just stops. so i took the motor mount apart and the motor looks ok but there is a tiny plate that falls out and i soon find that the onld screw holding the grip over the moter had been stripped right off and i had screwed the stripped piece right up and this is what i beleive happened since there were scratch marks on the little plate. so then i soon find that i have blown a fuse, i thought my motor was fried can any one explain this to me??

sweet I was worry if I pick an ics up, my gp30 would be useless

http://www.red-alliance.net/phpBB2/v...r=asc&start=18

Apparently it's a little smaller and thinner than the real steel one, but with some adjustment on the scope itself it will work. Also, in the review thread on Red Alliance, there is a picture of one with a PK-AS mounted on the stock rail.

I have a theory that ICS may have fixed the rail in the recent batch of guns.

I found an 8.4 3600 nimh fit with a little persuasion, 9.6 large was out of the question though.

RE:Battery?
 

Thanks, so I'm guessing that it would be less risky just getting an 8.4V 3300mA instead? Or is the 3600mA still the way to go, exactly how much persuasion are you talking about? :hammer:

If you find an 8.4, 2000mah battery, it will work. Even a 1700mah will work. No need to go overboard.

When you reach that much MAH capacity, sometimes the cells of the battery pack a a bit larger, so they dont fit well inside the stock. 9.6 volts wont fit at all.
He means he had to force his battery in there.

Before you go on a spending spree, go through the age-verification process. And there are two gaming sites in the region you can visit.

Yes.Mine fits very well with a little adjustment.

i heard it just needs a tiny spacer to fit

Got mine a couple of days ago and love it, whats the best lowcap magazine for a good fit into the ics body?

No major gripes so far, just waiting for a good game day to test here in BC but it's been kind of slow recently.

So does this gun take the STAR 30 roud clips or not?