Airsoft Canada
Page 4 of 5 123 4 5
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Inokatsu's upcoming CO2-powered M1911/Series'70 Blowback Pistol (https://airsoftcanada.com/showthread.php?t=108363)

DuffMan April 1st, 2011 06:05
Quote:
Originally Posted by Ninja_En_Short (Post 1403106)
Errr... Inokatsu actually presents that as something new ? It has been done very well by KJW two or three years ago.
The CO2 pellet sticks out of the single stack mag and the frame is enlarged at the bottom so the mag can get in.
The better come with something else than all steel parts if they don't plan on being eaten alive.
Oooh boy, if you had held it in your hand, you'd be singing a different tune.

SteelToe June 1st, 2011 22:08
Not the latest update but its out there.

The 1911 will come in 3 different style and finish: WWII, Stainless and blued.

Pics courtesy of Arclight from redwolf I believe.

Blued with presentation box.
http://farm5.static.flickr.com/4091/...d0130b29_b.jpg


WWII.
http://farm5.static.flickr.com/4133/...ca0d1801_b.jpg
http://farm5.static.flickr.com/4144/...b17f2746_b.jpg


Stainless.
http://farm5.static.flickr.com/4145/...3d94e8f5_b.jpg

The presentation box could very well likely be mock ups.

Wantabe_Warrior June 12th, 2011 23:37
I hope we could make it a MEU pistol/ICQB pistol/other modern/tactical M1911. I like the A1 version but I'm REALLY like the Kimber Desert Warrior (damn near perfect combination of form and function).

SuperCriollo July 8th, 2011 19:21
Looks like is getting close to be realised....

YouTube - ‪Tactical Episode 03 - "11 Things You Should Know About Stances and Grips" (HD) - Redwolf Airsoft‬‏

Look at minute 8:17


Cant wait.

ap27 July 28th, 2011 00:46
KWC seems to have released a CO2 powered 1911. They've done the same thing for the mag, made it slightly thicker so its somewhere between single and double stacked. I guess we'll see a similar thing in the Ino


‪KWC 1911 GBB (Full metal CO2 version) - Redwolf Airsoft - RWTV‬‏ - YouTube

Gunny_McSmith July 28th, 2011 11:35
yep, I jsut saw it too! I kinda want one! :)

Kid July 31st, 2011 16:59
I hope that this delay and KWC's release results in some real R&D so we can have a decent magazine that doesn't stick out on this $1000 pistol.

Styrak July 31st, 2011 23:15
Quote:
Originally Posted by ap27 (Post 1508219)
KWC seems to have released a CO2 powered 1911. They've done the same thing for the mag, made it slightly thicker so its somewhere between single and double stacked. I guess we'll see a similar thing in the Ino
They didn't make it thicker, it's the same width as other 1911 mags. However like the KJW 1911 CO2 mags there's holes in the sides for the CO2 capsule to stick out, and indents at the bottom of the grip for the mag to fit in

Pre-1898 October 25th, 2011 17:30
Are they available in Canada ? if so where ?

DuffMan December 16th, 2011 13:27
So...any inbound to Canada?

Crunchmeister December 16th, 2011 13:40
Do want....

Gunk December 16th, 2011 15:18
Still want...

Crunchmeister December 16th, 2011 15:19
So have these actually been released yet?

ILLusion December 16th, 2011 15:29
Quote:
Originally Posted by Crunchmeister (Post 1576426)
So have these actually been released yet?
In very limited quantities to select resellers.

Crunchmeister December 16th, 2011 15:29
Well, that settles it. WTB post going up! lol


All times are GMT -4. The time now is 05:40.
Page 4 of 5 123 4 5
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.