Airsoft Canada
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Lipo Buffer Tube option (https://airsoftcanada.com/showthread.php?t=98982)

TokyoSeven May 12th, 2010 14:39
Probly no more than 13-14 CM.

m102404 May 12th, 2010 14:41
The short KA 11.1v 1100mah 15C battery will fit nicely, with the wires/connectors. The other longer stock tube lipo's will still have the wiring/plugs sticking out a bit

MADDOG May 12th, 2010 14:53
Quote:
Originally Posted by Blackthorne (Post 1169025)
Thanks budz. I was just looking around trying to figure out to convert Miz gun over to lipo.

What charger and alarm do you have bro?
You forget about those new Madbull LifePo I loaned to you at CQB.
Fit perfectly in the foregrip (Non RAS/RIS) and no worries of over discharge battery failure. I use these exclusively now and love them. Just use till they run out of juice to pull the spring, no need for alarms the battery knows when tostop working and the life span for recharging is much longer.

You have to buy the proprietary charger though as the connector for the charging unit is not standard (Dirty move Madbull, I found out the hard way). Airsoft parts.ca has the full line up.

http://www.madbullairsoft.com/Englis...index&cPath=36

Zeonprime May 12th, 2010 15:03
Quote:
Originally Posted by MADDOG (Post 1232595)
You forget about those new Madbull LifePo I loaned to you at CQB.
Fit perfectly in the foregrip (Non RAS/RIS) and no worries of over discharge battery failure. I use these exclusively now and love them. Just use till they run out of juice to pull the spring, no need for alarms the battery knows when tostop working and the life span for recharging is much longer.

You have to buy the proprietary charger though as the connector for the charging unit is not standard (Dirty move Madbull, I found out the hard way). Airsoft parts.ca has the full line up.

http://www.madbullairsoft.com/Englis...index&cPath=36

So you swear by the madbull products? I've been seriously considering going over to LifePo even outfitted one of my guns with a TM3 in prep for a new battery.

heikis May 12th, 2010 15:25
Quote:
Originally Posted by m102404 (Post 1232588)
The short KA 11.1v 1100mah 15C battery will fit nicely, with the wires/connectors. The other longer stock tube lipo's will still have the wiring/plugs sticking out a bit
so I might have troubles fitting a 125mm Firefox lipo in there...
If anybody has experience fitting a longer firefox lipo (125mm) inside a king arms buffer tube then sure let me know about it!

thanks


All times are GMT -4. The time now is 06:31.
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.