Airsoft Canada
Page 2 of 5 1 2 345
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   New Best PRC-148 / MBITR replica- info from http://bb.power-dy.com: GEAR Discussion (https://airsoftcanada.com/showthread.php?t=95595)

EagleDriver September 27th, 2010 22:33
Quote:
Originally Posted by philster911 (Post 1322755)
If quality is good, be sure i'll buy one! finally my Peltor Comtac II will work correctly with a good Peltor PTT ! :D
The one on RSOV has a copy of the instructions, and it shows a two-pin headset/mic plug on the side. It seems possible that the MBITR plug on the top may not actually be used.

Gish September 28th, 2010 11:02
Heres two videos from a Chinese site
1. Throwing the thing around - http://v.youku.com/v_show/id_XMTkzNjUyNDIw.html
2. Using it - http://v.youku.com/v_show/id_XMTkzNjUwNjYw.html

I'm pretty interested in this piece, but like most people pretty wary as to the quality, etc. Be a shame to drop 250 on it and find out it's junk like all the other knockoffs.

Conker September 29th, 2010 17:50
I have a contact in China on them... I asked at what price I can have one for evaluation, and then depending if I can have more for a price significantly lower than the retail* I might setup a group order.

I'll keep you updated.

*I say significantly lower than retail, as in if the price they give me is like 235 it's not worth the trouble organising this

Yannos September 29th, 2010 18:07
I'm getting more and more a hardon for that radio lol.

Conker September 29th, 2010 18:13
BTW both the side Kenwood-type plug works (so for clone headsets, it's a go) and the top MIL-STD is also said to be working (I'm waiting for a confirmation on that).

philster911 September 29th, 2010 18:49
Quote:
Originally Posted by Conker (Post 1323967)
BTW both the side Kenwood-type plug works (so for clone headsets, it's a go) and the top MIL-STD is also said to be working (I'm waiting for a confirmation on that).
Get me on the damn group order list NAO! :D

Conker September 30th, 2010 00:34
Looks like I can have group order-worthy price!

Everyone interested, keep an eye on this thread. I'll look into setting this up.

doc_pathfinders September 30th, 2010 10:05
i like the way this thread is heading..

i'm going to keep a close eye on this :)

yyz September 30th, 2010 11:37
interested if its the right price.

Gish October 1st, 2010 12:57
Ditto color me interested in it if a sample review turns out favorable. If so i'm sure I could get the rest of the guys to buy (5)

Conker October 7th, 2010 07:28
FYI
Quote:
Unique LCD display, the same size and structure with the origial one; body with true printing and lettering.the battery and the body can be splited. All the screws on the body are not for decoration , all can be detachable. Factory restore trademark and nameplate can be found at the side of the body. Open theSimulated interface dust cover on the body side, it can be used with the kenwood plug directly. At top of the plug ,there is 5 pins circule structure,which can be used with headphones or Microphone. All keys are available and have specific funtions. Acessory of the item: Deluxe set, a long folding antenna, a short folding antenna, charger ,battery,maual ,D-ROM and data lines,airsoft player can enter any requencies into the intercom with PC. Antenna extension cable, Molle system fixed card,which used in the the back of the MOLLE system webbing to fixed the antenna. The intercom are connected with the antenna with the Antenna extension cable.
Sorry for all the typos, I didn't write this.

Yannos October 7th, 2010 10:38
Still doesn't say if it will accept Mil. Microphone. Thats my biggest bug.

EagleDriver October 7th, 2010 10:46
"At top of the plug ,there is 5 pins circule structure,which can be used with headphones or Microphone." is probably the closest we will get until someone tests to see if there is an impedance mismatch.

Yannos October 7th, 2010 10:56
Quote:
Originally Posted by EagleDriver (Post 1328534)
"At top of the plug ,there is 5 pins circule structure,which can be used with headphones or Microphone." is probably the closest we will get until someone tests to see if there is an impedance mismatch.
Yeah exactly, its the impedance and not the plug the problem :P

EagleDriver October 7th, 2010 11:10
I have a COMTAC radio with MBITR plugs, so if I can get my hands on one, i.e. if there is a group buy maybe I could buy one down here, then I could test it. It's funny but I run the Puxing and Woxun radios and they have the Kenwood plugs, so either way I think I should be ok with this radio. What remains to be seen is if I will actually want to carry it, because the new wouxun has more features and is lighter (plus no bulky MBITR plug barrel assembly.)


All times are GMT -4. The time now is 03:23.
Page 2 of 5 1 2 345
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.