Airsoft Canada
Page 11 of 15 « First 2345678910 11 12131415
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Reviews (https://airsoftcanada.com/forumdisplay.php?f=17)
-   -   WE AK-74U - was good, now bad (https://airsoftcanada.com/showthread.php?t=132115)

N_Force March 17th, 2012 11:53
l use pmc mag on my we ak74u, I also like the way it looks. But the mag insert is not as smooth as the original mag, you may have to modify a bit on top of the bb feeding lip.

http://www.airsoftcanada.com/picture...pictureid=3851

Quote:
Originally Posted by BlackBerry (Post 1623407)
I've got a noob question.

Would it be awkward to use those PMC mags on the WE74 model?

My limited understanding is that the AK74 chambers 5.56 round, while the AK47 uses the 7.63 rounds.

I think the metal mags look great on the WE74, but I'm also aiming for an accurate representation.

Perhaps there is a derivative of the 74 model that accepts the 7.63 I'm not aware of??

Enlighten me!

MilanWG March 17th, 2012 17:53
Can someone please post pictures on how-to install a new RA-Tech trigger group?

Would be appreciated...

HeadlessChicken March 18th, 2012 11:11
OK I just picked up the BNIB WE PMC + 2 spare PMC mags. Stock mag didn't work; gased it up, disabled open bolt on empty feature, fired, nada...will be returning to seller to fix this issue since the 2 spare mags fired fine. Tried it today...none of them work now. Gased them up, 1 of the spare mags now sounds like it's leaking.

Honestly, I had such high hopes...its a beauty of a gun.

Rommen March 18th, 2012 12:57
Quote:
Originally Posted by MilanWG (Post 1623594)
Can someone please post pictures on how-to install a new RA-Tech trigger group?

Would be appreciated...
I can do one this week if there isn't a guide posted elsewhere... Pretty simple swap. ALOT easier than an AR trigger group lol

MilanWG March 18th, 2012 12:59
Rommen - Thanks, that would be VERY much appreciated.

Anxiously awaiting pics :)

BlackBerry March 18th, 2012 13:01
http://www.airsoftcanada.com/picture...pictureid=3851[/QUOTE]

ohh I like the polished bolt-nice!

N_Force March 18th, 2012 18:57
before you return them, make sure something first. If you enable the empty bolt lock feature, after you shot empty a mag and reload bb's, you have to move a pin down that right beside the gas release valve everytime, not the top switch, if not, that pin wouldn't go down to let you fire cause that is the design. Check the Manuel you'll see.
Quote:
Originally Posted by HeadlessChicken (Post 1623817)
OK I just picked up the BNIB WE PMC + 2 spare PMC mags. Stock mag didn't work; gased it up, disabled open bolt on empty feature, fired, nada...will be returning to seller to fix this issue since the 2 spare mags fired fine. Tried it today...none of them work now. Gased them up, 1 of the spare mags now sounds like it's leaking.

Honestly, I had such high hopes...its a beauty of a gun.

k0zplay March 18th, 2012 21:38
Quote:
Originally Posted by N_Force (Post 1624013)
before you return them, make sure something first. If you enable the empty bolt lock feature, after you shot empty a mag and reload bb's, you have to move a pin down that right beside the gas release valve everytime, not the top switch, if not, that pin would go down to let you fire cause that is the design. Check the Manuel you'll see.
That's true, took me like an hour to figure it out lol

jamex March 19th, 2012 14:00
1 Attachment(s)
Can anyone tell me what the purpose of the lever is behind the site in the attached picture (AK PMC). It looks like it might lock something to the top rail, or its simply decoration to appear like the real steel.

Brian McIlmoyle March 19th, 2012 14:05
Quote:
Originally Posted by jamex (Post 1624424)
Can anyone tell me what the purpose of the lever is behind the site in the attached picture (AK PMC). It looks like it might lock something to the top rail, or its simply decoration to appear like the real steel.
Gas tube release cam on the RS .. no idea if it works on this one as same ..or if it's just there for aesthetics

jamex March 19th, 2012 14:36
Quote:
Originally Posted by Brian McIlmoyle (Post 1624428)
Gas tube release cam on the RS .. no idea if it works on this one as same ..or if it's just there for aesthetics
Ah good to know, thanks. Purely asthetics then, as the gas tube just sort of pops out and doesn't attach to anything internally.

Rommen March 19th, 2012 17:56
I did the trigger group swap guide today. All pics and notes are taken, I'll throw them up later today or tomorrow.

HeadlessChicken March 19th, 2012 21:24
Quote:
Originally Posted by N_Force (Post 1624013)
before you return them, make sure something first. If you enable the empty bolt lock feature, after you shot empty a mag and reload bb's, you have to move a pin down that right beside the gas release valve everytime, not the top switch, if not, that pin wouldn't go down to let you fire cause that is the design. Check the Manuel you'll see.
Wish I made it home early enough to try it...frigging public transit, will give it a try tomorrow.

Rommen March 19th, 2012 23:49
I made a separate thread for the RATech trigger installation guide, felt it deserved it. There's alot of pictures, it should be done by tomorrow though

http://airsoftcanada.com/showthread....30#post1624830

Latvian291 March 21st, 2012 00:54
Quote:
Originally Posted by BlackBerry (Post 1623860)
ohh I like the polished bolt-nice![/QUOTE]

AK-74Us never had wooden grips, polished bolts, and used 74 mags not 47 mags. Did you try to make it look unrealistic on purpose?


All times are GMT -4. The time now is 18:29.
Page 11 of 15 « First 2345678910 11 12131415
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.